|
DF-130E
Cost Effective Oxygen Analyzer
A Cost-effective Solution For A Range of
Oxygen Analysis Needs
- Every analyzer is factory calibrated and ready
to use
- Revolutionary non-depleting E-Sensor requires
little or no calibration over time
- No periodic sensor replacement – reliable
performance day-after-day
- With STAB-EL™ option, no acid scrubbing
is required for trace levels
The DF-130E is configured to provide you with
a reliable, dependable and accurate oxygen analyzer at a price you
can afford. Just take it out of the carton and start operating.
Options include – oxygen alarm, sample pump, STAB-EL™
acid gas system, CE certification.
DF-130E Specifications
Range
Ranges are available from 0-10 ppm to 0-25%
Sample Gas Compatibility
STANDARD SENSOR: All inert and passive gases including N2, CO, H2,
Ar, freons, hydrocarbons, etc.
SENSOR WITH Stab-El™ OPTION: Neutralizes trace contaminants
including acids such as CO2, H2S, NOX, SOX, etc. (Consult Delta
F for concentration limits.)
Options
Oxygen Alarm
Stab-El™ Acid Gas System
Sample Pump
Classified Area Enclosures
CE Certification
Accuracy (at
constant temperature)
Greater of ±3% of reading or
0.5% of range
Response Time
Responds instantaneously to O2 change.
Equilibrium depends on specific conditions. Typically <10
seconds to read 90% of a step change.
Sample Requirements
Gas phase, non-condensing, 0° to 150°
F.
Flow should be 1.0 to 3.0 scfh at 0.2 to 1.0 psig pressure.Misc.
19.7cm W x 21.6cm H x 25.4cm D 7kg. (7.75"W
x 8.5"H x 10"D 15 lbs.)
Operate between 0° and 45° C ambient (32° and
120° F)
115 VAC or 220 VAC at 25 Watts
For more information, click here to view
the DF-130E Datasheet pdf.
View the DF-130E Specifications & Configuration Sheet |
