|
DF-110E
Maintenance Free Oxygen Analyzer for OEMs
Flexible, Accurate and Reliable Oxygen Analysis
to Meet Your OEM Requirements
- Instantaneous response to oxygen change- less
than 10 seconds to read 90% of a step change
- Flexibility - put together the exact configuration
you need to include in your system
- Performance - the analyzer is delivered ready
to use
- Low/No Maintenance - no recalibration - no sensor
replacement necessary
- STAB-EL™ option eliminates acid scrubbing
for trace level measurements
The DF-110E offers a flexible and cost-effective
way to include superior oxygen analysis in your OEM system. The
DF-110E is calibrated to standards traceable to NIST and operated
for several days to ensure flawless performance out-of-the-box.
Depending on the application, the sensor can operate for years without
recalibration and requires only the occasional addition of distilled
water for maintenance.
DF-110E Specifications
Range
Ranges are available from 0-10 ppm to 0-25%
Sample Gas Compatibility
STANDARD SENSOR: All inert and passive gases including N2, CO, H2,
Ar, freons, hydrocarbons, etc.
SENSOR WITH Stab-El™OPTION: Neutralizes trace contaminants
including acids such as CO2, H2S, NOX, SOX, etc. (Consult
Delta F for concentration limits.)
Options
Oxygen Alarms
Stab-El™Acid Gas System
Remote Operation
Remote Sensor
Flow Alarm
Three Range
Sample Pump
Accuracy (at
constant temperature)
Greater of ±3% of reading or 0.5% of
range
Response Time
Responds instantaneously to Oxygen change.
Equilibrium depends on specific conditions. Typically <10
seconds to read 90% of a step change.
Sample Requirements
Gas phase, non-condensing, 0° to 150°
F.
Flow should be 1.0 to 3.0 scfh at 0.2 to 1.0 psig pressure.
Misc.
Operate between 0° and 45°C ambient (32°
and 120° F)
115 VAC or 220 VAC at 25 Watts
For more information, click here to view
the DF-110E datasheet pdf.
View the DF-110E Specifications & Configuration Sheet |
